Ag Leader GPS 2100 Operators Manual - Manual (Page 43)

GPS 2000/2100 Operation
Ag Leader Technology
Apri1998 3-25
the numeric beacon frequency that the receiver is using or the actual name
of the beacon location in standard mode.
Follow these steps to switch between displaying beacon frequency or
location:
Step Action
1 Set the display to standard mode.
2 Press the SETUP key until FREQ/LOC is above F2. Press F2.
3 LOC: is now displayed on the screen.
4 To return FREQ: to the display, press F2 or repeat the previous
steps.
SET UNITS Select this option under the setup key to display the units that the GPS
2000/2100 provides on the three different modes.
Follow these steps to change the units displayed on all screens:
Step Action
1 Set the display in standard mode.
2 Press the SETUP key until SET UNITS is displayed above the F4
key. Press the F4 key.
3 A description of the units for the main screens is now displayed.
4 To switch the units from the default setting of Imperial units to
Metric units, press the F1 key.
5
The screen will now switch back to standard mode and the units
change is now in effect.
6 Repeat the above process to change the units back at any time. The
units setting do not effect data collection.