Ag Leader GPS 2100 Operators Manual - Manual (Page 35)

GPS 2000/2100 Operation
Ag Leader Technology
Apri1998 3-17
then use the up or down arrow keys to change the values.
Follow these steps to edit mark names:
Step Action
1 Set the GPS 2000/2100 in standard mode.
2 Press the SETUP key until EDIT MARK is located above F1.
Press F1, and the EDIT MARK NAMES screen should appear.
3 Use the directional arrow keys to select a mark number.
4 Use the left and right arrow keys to move the cursor down next to
MARK NAME:. Now use the left and right arrow keys to move
from character to character in the name. The up and down arrow
keys are used change the current character that the cursor is located
on. The mark name can consist of 8 characters.
5 Press ENTER to return to standard mode.
Another method of editing mark names is to use the GPS 2000/2100
Utilities program. To use this program to edit names see section 4,
Software.
EDIT FLD
Select this option, found under the setup key, to activate the FIELD EDIT
SCREEN to edit field information. Use the directional arrow keys to select
the field number, then change its name and select a data type to correspond
with that field.
Follow these steps to edit field names and change data types:
Step Action