Vt alarms and trouble codes, Vt a, Larms – Ag Leader Versa Users Manual User Manual

Page 98: Rouble, Odes

Firmware Version 5.4

Assign implement functions to ISO compatible
inputs.

The number of functions and inputs shown on the
Auxiliary Mappings screens will vary depending on
the implement and input devices connected to the
display.

Note: Implement functions can not be mapped to

Ag Leader

switches.

VT A

LARMS

AND

ROUBLE

ODES

If the display receives an active trouble code, the
Virtual Terminal Alarm (A) will appear in the
Status bar at the top of the screen.

When an alarm is activated on the VT, the display
will indicate the alarm by flashing “Virtual Terminal
Alarm” in the status bar.

Alarms are acknowledged and cleared by pressing

This button is only present when a virtual terminal
alarm has been activated.

The Devices screen displays the following
information:

• (A) Caution icon indicates module has active
trouble codes (DTCs)

• (B) Equipment Type

• (C) ECU Serial Number

• (D) VT Manufacturer, name and code

Auxiliary Mappings

Function

Input

Disable Main
Drive Shutoff

Low fan speed detected

Virtual Terminal Alarm

Devices

CAN Name:

76 10 2B DB 00 B0 0C A0

Self Configurable:

Yes

Industry Group:

Agriculture and Forestry

Device Class:

Sprayers

Device Class Instance:

Function:

128

Function Instance:

Identity Number:

725110

Manufacturer Code:

Kverneland Group, Electronics Division

ECU Instance

CAN A

CAN B

130 ISO NODE