Ag Leader Versa Users Manual - Manual (Page 187)

173
A
PPLICATION
L
IQU
ID
R
ATE
C
ONTROL
20. Select Speed Source
Use drop-down menu to select Primary Source, set Backup Source, and configure Auxiliary Channel.
Press Calibrate Speed Sensor to launch the Speed Sensor Calibration Wizard.
21. Enter Configuration Name
A suggested name for the configuration appears. If desired, Press to enter a different name.
Press when complete.
The complete configuration should now appear under the Application heading located on the
Configuration tab of the Configuration Setup screen.
The Operating Configuration is now able to be selected when starting a new Field Operation with the
Field Operation Wizard. For more information, see
“Setup Event” on page 45 .
I
MPLEMENT
O
FFSETS
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > your
specific configuration > Setup (wrench) button >Offsets button
Implement Offsets screen appears, with each
channel’s settings shown on its own tab.
Defaults to the value entered during Configuration
Wizard
Boom sections can independently be offset forward
or back (application only)
Press to access Swath Section
Offsets screen.
Configuration
Select Your Specific
Configuration
Offsets