Ag Leader Versa Users Manual - Manual (Page 250)

236 Firmware Version 5.4
Beginning with the 5.4 display firmware upgrade, checking the Automatic Control
check box exposes a Spinner Icon in the Task Bar that allows user to turn on/off
spinners from the Map Screen. Automatic Control default setting is unchecked.
C
REATING
P
RODUCTS
Creating application products including dry fertilizer blends can be completed upon initial setup or from
the Product Selection screen of the Field Operation Wizard when starting a field operation.
CREATING SINGLE PRODUCTS
To create a single product, to be added to a blend or to be applied by itself, use the on-screen wizard
described in the following steps.
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Product tab > Add (+)
button > Application Product button
1. Select Product Type
Use drop-down menu to select Product Type.
Use drop-down menu to select Product.
Press to continue.
2. Select Product Units
When selecting the following fertilizers, use drop-down menu to select the product units:
- Ag Lime
- Pell Lime
- User Defined Lime
- User Defined N-P-K
- User Defined Micronutrient
- Other
Press to continue.
3. Enter Product Name
Default product name appears. Press to enter a new name.
Press to complete product setup or p ress to return to Configuration Setup screen without
making a change.
Created product should appear under the Application heading located on the Product tab of the
Configuration Setup screen.
CREATING DRY FERTLIZER BLENDS
Dry fertilizer blends are set up using the on-screen wizard described in the following steps.
Product
Application
Product
Product
Mix / Blend