Spreader, Create configuration, Preader – Ag Leader Versa Users Manual User Manual
Page 245: Reate, Onfiguration
231
A
PPLICATION
S
PREADER
A
PPLICATION
S
PREADER
DirectCommand for spinner spreaders is capable of controlling the product conveyor, spinner speed,
monitoring bin level, and providing multiple prescription rate control for up to three granular products.
The control modules support PWM, motorized servo, Mark IV.2, Mark IV.4, and Mark V hydraulic control
valves. DirectCommand granular application system also supports application control of multiple bin
spreaders.
C
REATE
C
ONFIGURATION
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > Add
(+) button > Application button
1. Select Vehicle
Use drop-down menu to choose a vehicle, or press
to enter a new vehicle.
2. Self-Propeller Applicator
P
ress
to create a new vehicle
Use drop-down to choose Vehicle Type and Select Self-Propelled Applicator
If applicable, Select All Wheel Steer. Press
to continue.
Press
to enter Make and Model name. Press
to continue.
3. Drawn Spreader
Select an implement from the drop-down list menu, or press
to create a new implement. Press
to continue.
Enter Implement Make and Model
- Press
to enter Make and Model name. Press
to continue.
Select Attachment Point
- Use the drop-down list to select an implement attachment method. Press
to continue.
Enter Hitch to Implement Axle Distance (Rear Drawbar Only)
- Press
to enter the hitch to implement axle distance. Press
to accept.
4. Add Granular Functionality
Press
then
to add Spinner Spreader functionality to the implement.
5. Select Controller
Use the drop-down menu to select a controller or press
to add a controller. Press
to
continue.
Configuration
Application
Granular
Application
Spinner
Spreader