Ag Leader Versa Users Manual - Manual (Page 111)

97
GPS
O
MNI
STAR S
ETTINGS
OmniSTAR (Differential Source drop-down
menu)
Press: Home button > Setup (wrench) button > GPS button > Receiver Setup (wrench) button >
OmniSTAR (Differential Source drop-down menu) > Setup (wrench) button
Note: If using the GPS 2500 receiver, see “OmniSTAR Settings — GPS 2500” on page 98 .
Note: The use of OmniSTAR® differential requires purchase of a subscription from OmniSTAR. Settings
related to using satellite differential correction vary based upon your geographic location. Setup details are
explained on the following pages. More specific information can be obtained by contacting OmniSTAR.
• Serial Number/OmniSTAR User ID
This box shows the serial number of your receiver. It may also display your OmniSTAR User ID.
Note: You will need to know this number when contacting OmniSTAR in order to set up the receiver.
• Differential Source
The choices include VBS, HP/XP, and HP/XP with VBS backup. These three options are described below.
- VBS - OmniSTAR VBS is a "sub-meter" level of service.
- HP/XP - The OmniSTAR XP service is more accurate than VBS, but slightly less accurate than HP. The
OmniSTAR HP (High Performance) service is the most accurate of the three options.
- HP/XP with VBS backup - If this option is chosen, and you lose your HP/XP signal, your receiver will
automatically switch to VBS.
Receiver
OmniSTAR Setup
Serial Number
0224019369
Differential Source
VBS
HP/XP
HP/XP with VBS Backup
Fast Restart
Provider Settings
Central USA (MSV-C) Frequency
Baud Rate 1200
1557.835
Custom
Frequency