Installing the cable management arm – HP ProLiant DL760 Server User Manual

Page 62

Text mode
Original mode

2-28 Compaq ProLiant DL760 Servers User Guide

Compaq Confidential – Need to Know Required

Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:

Part Number: 173774-001 File Name: c-ch2 Installing the Server in a Rack.doc Last Saved On: 1/24/01 4:46 PM

Installing the Cable Management Arm

To install the cable management arm into the rack:

NOTE: The following procedure describes installing the cable management arm supplied
with the ProLiant DL760 server. For complex rack installations including a large number
of cables, you can obtain a high capacity cable management arm as an option kit, part
number 124711-B21.

1. Slide the server into the rack.

2. Attach the cable management arm to the cable management arm bracket

using two M6 x 1.0-12L Phillips screws.

Figure 2-18. Attaching the cable management arm to its bracket