HP ProLiant DL760 Server - Manual (Page 156)

8-8 Compaq ProLiant DL760 Servers User Guide
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: i-ch8 Configuring the Server.doc Last Saved On: 1/18/01 5:59 PM
RAID Level and Stripe Size Migration
Use the Online RAID Level or Stripe Size Migration screen to:
■ Reconfigure a currently configured logical drive to a new fault-tolerance
(RAID) level
■ Change an existing logical drive’s stripe size to a new stripe size
Both migrations can be done online on Windows NT 4.0 or NetWare 5.0
without causing any data loss. They can also be performed offline on other
operating systems by booting the SmartStart and Support Software CD and
running the ACU.
Errors and Warnings
When you start the ACU, the software checks each controller for configuration
errors. If a problem is found, the ACU displays an error or warning message
that describes the problem. Error and warning messages include instructions to
correct configurations. If a warning message indicates “Internal Error Has
Occurred” and cites an error code number, the problem requires assistance
from Compaq technical support. See “About This Guide” at the beginning of
this book for technical support phone numbers.