Installing a hot-plug power supply, Installing a hot-plug power supply -10 – HP ProLiant DL760 Server User Manual

Page 113

5-10 Compaq ProLiant DL760 Servers User Guide

Compaq Confidential – Need to Know Required

Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:

Part Number: 173774-001 File Name: f-ch5 Installing Hardware Options - Hot Pluggable.doc Last Saved On: 1/18/01 6:12 PM

Installing a Hot-Plug Power Supply

The ProLiant DL760 server ships with either one or two hot-plug power
supplies depending on the model. The system power in the ProLiant DL760
server does not have to be shut off to replace one of the power supplies.

WARNING: To reduce the risk of electric shock or damage to the equipment:

■

Install the power supply before connecting the power cord to the power
supply.

■

Unplug the power cord before removing the power supply from the server.

To replace a hot-plug power supply with the system power on:

1. Remove the power cord from the power supply to be replaced and

release the power cord clamp.

Figure 5-6. Removing power cord