HP ProLiant DL760 Server - Manual (Page 150)

8-2 Compaq ProLiant DL760 Servers User Guide
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: i-ch8 Configuring the Server.doc Last Saved On: 1/18/01 5:59 PM
Setting Up the SCSI Array
This portion of the chapter describes the features and setup of the
ProLiant DL760 server Integrated Smart Array Controller (Ultra2 support).
Features
The ProLiant DL760 server Dual Channel Integrated Smart Array Controller is
a dual Ultra2 SCSI array controller. Both channels support Low Voltage
Differential (LVD) SCSI devices. The controller supports the following
features:
■ 16 MB total memory, 12 MB Read Ahead Cache
■ Support for up to four internal Ultra2 SCSI Hot-Plug drives in RAID 0,
1, 0+1, and 5
■ External VHDCI SCSI connector (tape port) to support external tape
drives for backup of the internal drives
■ Migration between RAID levels
■ Migration between stripe sizes
■ Prefailure notification and Pre-Failure Warranty (through Compaq
Insight Manager)
■ Online spares
Port 2 is dedicated to controlling the SCSI drives in the internal drive bay.
Port 1 is connected to an external VHDCI SCSI connector (tape port).