HP ProLiant DL760 Server - Manual (Page 120)

Installing Hardware Options - Hot Pluggable 5-17
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: f-ch5 Installing Hardware Options - Hot Pluggable.doc Last Saved On: 1/18/01 6:12 PM
1
3
2
Figure 5-12. PCI Hot Plug LED indicators in the I/O module
Table 5-3
PCI Hot Plug LED Indicators and Button
Amber LED Indicator OK to Open Slot Condition and Status
Off Slot does not require attention.
On Slot requires attention. There may be a problem with
the slot, the PCI board, or the driver. Check the green
LED before opening the slot.
Refer to the IML and/or the PCI Hot Plug software
application for description of the problem indicated.
Green LED Indicator OK to Open Slot Condition and Status
On No Power is applied to the slot.
Flashing No Power to the slot is being turned off or on. This
process may take several minutes. DO NOT open the
slot release lever until the green LED is completely off.
Off Yes You can replace or remove the board in this slot only.
PCI Hot Plug Button Used to activate and deactivate the associated PCI Hot
Plug slot.
Each PCI Hot Plug button is used to activate or deactivate its associated PCI
Hot Plug slot. Activating or deactivating a PCI Hot Plug slot can also be
accomplished through the operating system PCI Hot Plug software application.