HP ProLiant DL760 Server - Manual (Page 109)

5-6 Compaq ProLiant DL760 Servers User Guide
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: f-ch5 Installing Hardware Options - Hot Pluggable.doc Last Saved On: 1/18/01 6:12 PM
Hot-Plug SCSI Hard Drive LED Indicators
The hot-plug SCSI hard drive LED indicators, located on each physical drive,
are visible on the front of the server or external storage unit. They provide:
Activity, Power/Online, and Fault status for each corresponding drive
when configured as a part of an array, and attached to a powered-on controller.
Their behavior may vary, depending on the status of other drives in the array.
1
2
3
Figure 5-4. Hot-plug SCSI hard drive LED indicators
This section provides the following information about hard drive LED
indicators:
■ A matrix of the possible LED configurations and what each combination
means
■ Guidelines for hot-plug drive replacement
For additional information on troubleshooting hard drive problems, refer to
“Hard Drive Problems” and “SCSI Device Problems” in Chapter 2 of the
Compaq Servers Troubleshooting Guide.
IMPORTANT: It is recommended that you familiarize yourself with the following
guidelines prior to performing a drive replacement.