HP ProLiant DL760 Server - Manual (Page 46)

2-12 Compaq ProLiant DL760 Servers User Guide
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: c-ch2 Installing the Server in a Rack.doc Last Saved On: 1/24/01 4:46 PM
Removing the Shipping Safeguards
To protect the power supply, Processor and Memory Module, and I/O module
from any damage during shipment, each is installed with a protective covering
bracket.
1. Loosen the screws and remove the power supply bracket as shown in
Figure 2-2 and Figure 2-3.
IMPORTANT: Save the bracket in a safe location. You will need to replace it if you have
to ship the server in the future.
2. After loosening the retaining screw
, rotate the bracket away from the
server by pulling on the right end of the bracket
.
3. When the left end disengages, remove the bracket
.
2
3
1
Figure 2-2. Removing the power supply shipping bracket