HP ProLiant DL760 Server - Manual (Page 56)

2-22 Compaq ProLiant DL760 Servers User Guide
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: c-ch2 Installing the Server in a Rack.doc Last Saved On: 1/24/01 4:46 PM
Installing the Outer Slide Rail Assembly
into the Rack
To install the outer slide rail assembly:
1. Place a mounting bracket in position according to the pencil marks made
earlier.
2. Attach the front of the bracket on the inside of the front of the rack
with one M6 x 1.0-12L Phillips screw in the bottom hole as shown
in Figure 2-12. Do not use washers.
IMPORTANT: Use one screw only in the bottom hole of the bracket; otherwise, proper
alignment is impossible.
Figure 2-12. Attaching slide rail assembly to the front of the rack