HP ProLiant DL760 Server - Manual (Page 107)

5-4 Compaq ProLiant DL760 Servers User Guide
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: f-ch5 Installing Hardware Options - Hot Pluggable.doc Last Saved On: 1/18/01 6:12 PM
Installing a Hot-Plug SCSI Hard Disk Drive
CAUTION: Before adding or removing any hot-plug SCSI drives, consult your
operating system instructions. Failure to do so could result in loss of data or
damage to equipment.
To install a hot-plug SCSI hard drive:
1. Remove the blanking panel in an unused drive bay by pushing the side
of the retaining clip inward
, then pulling the blanking panel
outward
.
2
1
Figure 5-2. Removing a hard-drive blanking panel
2. Push the release button on the left of the new drive and rotate the
hot-plug drive ejector lever outward to unlock the drive.