HP Traffic Director sa7220 - Manual (Page 131)

C H A P T E R 4 Tools Screen
119
Netstat The Netstat command displays the SA8220’s routing tables. To run
Netstat:
1. From the Command menu, click netstat.
2. (Optional) In the Parameter field, type any parameter from these
options/variables:
• -I Can be exp0 or exp1 for dual-homed device
• -n Do not try to use DNS to resolve IP addresses
• -p Where can be either “ip”, “icmp”,
“igmp”, “tcp”, or “udp”
Forms of the netstat command include:
• No switches displays active network connections
• -r displays the device’s forwarding table
• -rs displays the device’s forwarding table statistics
• -s displays protocol statistics
• -i displays interface configuration information
• -is displays interface statistics
3. Click Run.
After a few seconds, the routing tables display in the Results
window, as shown below.