HP Traffic Director sa7220 - Manual (Page 133)

C H A P T E R 4 Tools Screen
121
Nslookup The nslookup command identifies the IP address of a given host, or
the host name of a given IP address. You can use this tool to
determine whether the SA8220 can resolve a host name or address, or
to get the IP address of a machine of which you know only the host
name. To use nslookup:
1. From the Command menu, click nslookup.
2. In the Parameters field, type the host name or IP address of the
target device.
3. Click Run.
After a few seconds, the nslookup information displays in the
Results window, as shown below.
Tools Screen Displaying Nslookup Results
4. To clear the Results window, click Clear.