HP Traffic Director sa7220 - Manual (Page 164)

C H A P T E R 5 HP Traffic Director Server Appliances User Guide
152
Admin
Commands The SA8220’s admin commands (see below) specify the server port
where the Graphical User Interface is accessed and verify the current
port.
File
Management
Commands The File Management commands are described below.
Command Description
config admin info Displays the current Graphical User Interface (GUI) port
config admin info
config admin port Sets the Graphical User Interface (GUI) port number. This is the
port where the admin GUI listens for connections. The Admin GUI
allows the user to configure the unit using a graphical user
interface.
config admin port
where port is the GUI http port. You can select any available port
between 1 and 65535. The default is 1095.
Command Description
cat Displays contents of the specified saved configuration file.
cat {filename}
where filename is the name of the file to be displayed. If not
specified, the file default.cfg is displayed.
copy Copies an existing configuration file to a new file.
copy to
where source is the name of the original file and destination
is the name of the target file.