HP Traffic Director sa7220 - Manual (Page 57)

C H A P T E R 3 Using the Boot Monitor CLI
45
Current active configuration
----------------------------
Product: HP SA8220
Version: 2.7
Patch Level: 0.0
Build: 12
Current time: Tue Sep 12 17:02:05 2000
Hostname: CSLab7k
-------------
Network side NIC:
IP Address: 10.6.3.21
Netmask: 255.255.255.0
MAC address: 0:a0:c9:ed:6c:cc
-------------
Service side NIC:
IP Address 10.6.5.21
Netmask: 255.255.255.0
MAC address: 0:d0:b7:6:c1:85
-------------
Default Gateway: 10.6.3.1
Domain: None
Primary name server: None
DHCP: Disabled
Failover mode: Disabled
Network NIC setup: Auto
Server NIC setup: Auto
NTP: Disabled
Autoboot: Disabled
Static Routes: None
RICH_Biased: Enabled
Do you really want to boot active.cfg? [y] --->
2. To boot to the normal operational prompt, type y .
3. To return to the monitor> prompt, type n .
Reboot with Configuration Changes
When you use the boot command after changing the SA8220’s
configuration, you are presented with a number of options. These
allow you to use the changed configuration, revert to the last saved