HP Traffic Director sa7220 - Manual (Page 136)

C H A P T E R 4 HP Traffic Director Server Appliances User Guide
124
Switch Description
-a Attempt to use the DNS to convert address to names
-c Exit after receiving packets
-D The TFTP path directory information. Required parameter.
-e Print the link-level header on each dump line
-f Print “foreign” Internet addresses numerically, rather than
symbolically
-F The filter expression file. If this file does not exist on the SA8220,
it is TFTPed from the TFTP host (see the -D and -H options).
Required parameter.
-H The TFTP host information. Required parameter.
-i Specify an interface to capture packets from (exp0 or exp1 for
dual-homed devices)
-n Don't convert addresses to names
-N Don't print domain name qualification of host names
-p Change the interface to promiscuous mode (every packet is
captured)
-P Preserves the filter expression file on the SA8220 for future use, so
that it is not TFTPed after the first use.
-q Output less protocol information
-s Capture (snapshot length) bytes of data from each
packet rather than the default of 76 bytes
-S Output absolute rather than relative TCP sequence numbers
-t Don't output a timestamp on each dump line
-tt Output an unformatted timestamp on each dump line
-T Force packets selected by to be interpreted as the
specified