HP Traffic Director sa7220 User Manual
Page 316
A P P E N D I X E
HP Traffic Director Server Appliances User Guide
304
Slow client response
from a web server
through the
SA8220
compared to
response time
directly from the web
server
Hostname/IP address
resolution on the server
may be misconfigured
or incomplete, causing
a delay in the server
response.
Add the hostname/real IP address of the
SA8220 to the HOSTS file on the server to
eliminate any delay in hostname/IP address
resolution on the server.
Slow client response
from a Web server
through the
SA8220
compared to
response time
directly from the
Web server
Ethernet link
configuration needs
adjustment.
The
SA8220
defaults to auto-negotiate mode
on the ethernet link. However, some older
routers may not handle auto-negotiate
correctly.
An attempt to
connect to the CLI
Administrative
interface results in
the message “CLI
not ready.”
Domain configuration is
incorrect or incomplete.
Verify that the domain is correct. If it is
incorrect, use the
dns
command at the Boot
Monitor prompt to re-enter the correct
information. Reboot the
SA8220
and restart
for changes to take effect.
DNS resolution is set on
the
SA8220
but is not
being used at the site.
If the customer is not using DNS, remove the
DNS entry by using the
dns
command at the
Boot Monitor prompt.
Corrupted network
configuration
Perform “factory_reset” to clear network info
such as host name, IP address, subnet mask,
and default gateway. Reboot the
SA8220
and
restart for changes to take effect.
The
SA8220
is
designated as the backup
SA8220
in a serial
failover configuration.
This message is normal on a
SA8220
designated as the backup for serial failover.
Problem
Possible Cause
Solution