HP Traffic Director sa7220 - Manual (Page 98)

C H A P T E R 4 HP Traffic Director Server Appliances User Guide
86
• Product version number
• Patch number
• Build number
• Compatible Multi-Site Traffic Director version number
Specifying the Active System Software Image
To change the active system image:
1. Click System Software.
2. In the System Software box, click the image you want to activate.
3. Click Boot. The SA8220 displays a message prompting you to
proceed but warning you that the SA8220 will reboot as shown
below.
Boot Warning Window
NOTE: You can also
perform a soft reboot of
the SA8220 by selecting
the currently active
software image and
clicking Boot. 4. Click Yes.
As the SA8220 reboots, the screen shown below displays.
Reboot Screen
You must close all browser windows to ensure your browser uses
the newly activated Administration Application.
5. Wait three to five minutes for the SA8220 to finish rebooting,
and then run the administration application.
6. Go to the Software tab of the Administration screen and verify
that the "Active" column of the selected image displays yes.