HP Traffic Director sa7220 - Manual (Page 193)

C H A P T E R 5 Security Commands
181
config sys security
custom telnet Enables or disables administration using telnet.
config sys security custom telnet [enable |
disable]
Disabled by default.
config sys security info Displays the current state of the security system
config sys security
mode Specifies the security mode. The default mode is "closed."
config sys security mode [open | closed |
custom]
where mode is one of the following:
• open permits all administration tasks to be performed without
restriction from all IP addresses and enables IP forwarding. IP
forwarding allows direct access to servers at their real IP
addresses.
• closed allows administration to be performed only from the
serial port.
• custom enables the configuration displayed by config sys
security custom info . Within config sys
security custom each SA8220 administration access
method can be configured individually.
Command Description