HP Traffic Director sa7220 - Manual (Page 239)

C H A P T E R 6 e-Commerce Appliance Scenarios
227
Procedure for Scenario 5
Using this procedure, you will add an SSL enabled service called
“SSL” to the previously defined “Richtest” policy group.
1. Telnet to the SA8220 and log on as the administrator ( admin ).
The Command Line prompt appears, as shown below:
HP SA8220#
2. To move the prompt to the Richtest policy group, type this
command:
HP SA8220#config policygroup richtest
3. To add the new service to the richtest policy group, type this
command:
HP SA8220/config/policygroup/richtest#
service create SSL vip 10.1.1.201 port 443 type
RICH_HTTP
Service SSL created.
4. To move the prompt to the service SSL level, type this
command:
HP SA8220/config/policygroup/richtest#
service SSL
NOTE: An existing key
may be imported using
the
key import
command.
5. To create the RSA private key, type this command:
HP SA8220/config/policygroup/richtest/service/
SSL#key create 1024
Finished creating key. Key strength is 1024.