HP Traffic Director sa7220 - Manual (Page 69)

C H A P T E R 3 Using the Boot Monitor CLI
57
setup Initiates the SA8220’s setup procedure. The system displays prompts
for all inputs necessary to initialize it.
Example:
monitor> setup
Enable dual NIC operation(yes,no)? [no] ---> yes
Autoconfigure the Network side NIC speed and
duplex? (yes,no)? [yes] --->
Autoconfigure the Server side NIC speed and
duplex? (yes,no)? [yes] --->
DHCP is disabled for dual NIC operation.
Enter the hostname you would like to assign to
the Network NIC: ---> CSLab7k
Enter the IP address for the Network side NIC
--->10.6.3.21
Enter the IP address for the Server side NIC
--->10.6.5.21
Enter the Netmask for the Network side NIC
--->255.255.255.0
Enter the Netmask for the Server side NIC
--->[255.255.255.0] --->255.255.255.0
Enter default gateway: --->10.6.3.1
Would you like to configure DNS (yes, no)? [no]
--->DNS not configured.
Specify failover method (disabled, serial,
route): [disabled] --->
Set Autoboot? (yes,no) [no] --->