HP Traffic Director sa7220 User Manual
Page 180
C H A P T E R 5
HP Traffic Director Server Appliances User Guide
168
config policygroup
service priority
Sets the priority level of the specified service.
config policygroup
where:
•
policy-name
is the name of an existing Policy Group
•
service-name
is the name of the service
•
level
is the service priority. You may specify a value from 1
(highest) to 5 (lowest), with 1 as the default.
config policygroup
service response
Sets the target response time.
config policygroup
where:
•
policy-name
is the name of an existing Policy Group
•
service-name
is the name of the service
•
mil-seconds
is the number of milliseconds the service
should take to respond to a request. This value is ignored
unless throttling is activated in the Policy Group. You can
specify a value from 1 to 2,147,483,647, and the default is 50.
config policygroup
service server-timeout
Specifies the amount of time a client request waits for the server to
respond before trying the next available server. If no server is
available, a 503 error ("No server available") message is sent to the
requesting client. Server-timeout mode is available only to
RICH_HTTP services.
config policygroup
where:
•
policy-name
is the name of an existing Policy Group
•
service-name
is the name of the service
•
seconds
is the number of seconds to wait for a connection.
You can specify a value from 1 to 2,147,483,647, and the
default is 5.
Command
Description