Configure opr for windows* nt, Set the loopback – HP Traffic Director sa7220 User Manual

Page 300

A P P E N D I X D

HP Traffic Director Server Appliances User Guide

288

Configure OPR for Windows* NT*

Set the
Loopback

1. From the Start menu, click on Settings, then open the Control

Panel.

2. The Control Panel appears, as shown below.

NOTE: OPR is not
available for SSL-
enabled services.

Windows NT Control Panel

3. Double-click on the Network icon.

The Network dialog appears, as shown in the next figure.

This manual is related to the following products: