HP Traffic Director sa7220 - Manual (Page 187)

C H A P T E R 5 System Commands
175
System
Commands The System commands are described below.
Command Description
config sys Changes the prompt to the config/sys branch
config sys
config sys autoboot Enables or disables the Autoboot function. If Autoboot is enabled,
the SA8220 prompts you to press a key during restart to enter the
Boot Monitor command line interface. If you ignore the prompt,
restart finishes with the SA8220 in normal operating mode. If
Autoboot is disabled, the restart sequence ends by displaying the
Boot Monitor interface. Autoboot is disabled by default. For
more details, please see “Boot Monitor” in Chapter 3.
config sys autoboot [enable | disable]
config sys hosts info Displays the contents of the SA8220's host file
config sys hosts info
config sys hosts delete Deletes the specified entry from the host file
config sys hosts delete
config sys hosts add Adds the specified IP address to the host file and associates it with
the specified hostnames. Hostnames are separated on the
command line by spaces.
config sys hosts add alias
{ alias2 alias3
alias4 alias5
alias6