HP Traffic Director sa7220 - Manual (Page 308)

A P P E N D I X D HP Traffic Director Server Appliances User Guide
296
Run a Web Service on the Loopback Interface
Using IIS 4.0
NOTE: If you cannot
find Internet Service
Manager, you do not have
IIS running on your
server. Download and
install the Option Pack,
then start this procedure
again. 1. From the Start menu, click Programs, click Windows NT 4.0
Option Pack, and then click Microsoft Internet Information
Server.
2. Run the Internet Service Manager.
3. After the Microsoft Management Console appears, expand the
Console Root and then the Internet Information Server nodes.
4. Right-click Default Web Service or the predefined service for this
Windows NT server and click the Properties option.
The Properties dialog box appears.
5. In the TCP Port field, type the port number of the OPR service
on the SA8220.
6. To save and close this dialog box, click Ok.
7. From the Internet Information Server node, right-click the
< machine-name > node. Click New and then click Web Site.
The New Web Site Wizard starts.
8. Type the description.
9. Type the IP, using the SA8220’s VIP.
10. Type the port number, using the service port defined on the
SA8220.
11. Browse and click to select the home directory for this service.
12. Configure the access permissions.
13. Click Finish.
The new service now appears under the < machine-name > node
as a new node.
14. Start the new service.