HP Traffic Director sa7220 - Manual (Page 188)

C H A P T E R 5 HP Traffic Director Server Appliances User Guide
176
config sys id Sets the unit identifier. The SA8220 is shipped pre-configured
with the unit’s serial number in this field. This command can
change the identifier if the site requires alternate asset tracking
information.
config sys id
where identifier is an alphanumeric value from 1 to 64
characters.
config sys info Displays all current system information
config sys info
config sys msd Changes the prompt to the config sys msd branch
config sys msd
config sys msd info Shows the current Multi-Site Agent information
config sys msd info
config sys msd port Sets the Multi-Site Agent port
config sys msd port
where port is an integer from 1 to 65535, and the default is 1999.
We recommend using free ports 1024 and higher.
config sys software Changes the prompt to the config sys software branch
config sys software
config sys software boot Select a software image and reboots the system under that image.
config sys software boot
where index is a valid index of an installed software image, as
displayed using the command, show sys software info .
Command Description