HP Traffic Director sa7220 - Manual (Page 194)

C H A P T E R 5 HP Traffic Director Server Appliances User Guide
182
SNMP
Commands The SNMP commands are described below.
Command Description
config sys snmp
community create Specifies community strings that the SA8220 will accept on
incoming SNMP requests. Up to 10 community strings can be
created.
config sys snmp community create ip
[|any] rights [ro|rw]
where:
•
is the name of the community you wish to create
• is the IP address of the host from which you
will accept this community string. If any is specified, the
community string will be accepted on requests from any IP
address.
• ro means the community string has read-only privilege.
• rw means the community string has read-write privilege.
The default community strings are public any ro and
private any rw .
config sys snmp
community delete Deletes a community string that the SA8220 can accept on
incoming SNMP requests.
config sys snmp community delete ip
[ | any]
where:
•
string is the name of the community string you want to
delete
• ip address is the IP address of the host from which you
will not accept this community string. If any is specified, the
community string will not be accepted on requests from any IP
address.
config sys snmp
community info Displays the community strings the SA8220 is configured to
accept.
config sys snmp community info