HP Traffic Director sa7220 - Manual (Page 151)

C H A P T E R 5 Routing Commands
139
Routing
Commands These commands are described later in this chapter.
config route ospf-area [backbone | ]
config route ospf-hello
config route ospf-dead
config route ospf-authtype [none | simple
ospf-authkey | md5 [ospf-authkey
md5 keyid ]
config route protocol [rip | ospf | disable]
config route rip-version [1 | 2]
config route role [standalone | primary |
backup]
Policy Group
Commands These commands are described later in this chapter.
config policygroup create
config policygroup delete | -all
config policygroup service
header-names [certificate
|
cipher-used | source-ip
| ssl-id ]
config policygroup throttle
[enable | disable]
Service
Commands These commands are described later in this chapter.
config policygroup service create
vip port {type
[TCP | UDP | RICH_HTTP]} {sticky [disable|
src-ip | cookie]} {sticky-timeout }
{backups [enable | disable]} {response
} {priority } {balancing
[load | robin]} {server-timeout }
config policygroup service delete
[ | -all]
config policygroup service
{enable} {disable}
{balancing[robin | load]}{sticky [disable |
src-ip | cookie]}
{sticky-timeout } {backups [enable |
disable]} {response } {dup-syn
} {priority }
{server-timeout }
config policygroup service
header