HP Traffic Director sa7220 - Manual (Page 230)

C H A P T E R 6 HP Traffic Director Server Appliances User Guide
218
Prerequisites for Scenario 3
Equipment
• At least one Web server with an installed loopback adapter (for
example, UNIX* or Windows* or NT*)
• One SA8220 physically installed on the network, with its Boot
Monitor and routing protocol configurations completed (please
see the “Getting Started Guide”).
Procedure for Scenario 3
Connect to the SA8220
1. Telnet to the SA8220 and log on as the administrator ( admin ).
The Command Line prompt appears, as shown below:
HP SA8220#
Create a Policy Group
1. To create a policy group, first move the prompt to the policy
group level by typing this command:
HP SA8220#config policygroup
2. To specify the new policy group's name (“oprtest” in this
example), type this command:
HP SA8220/config/policygroup#create oprtest
policy group oprtest created.
3. To move the prompt to that level, type the new policy group's
name:
HP SA8220/config/policygroup#oprtest