HP Traffic Director sa7220 - Manual (Page 139)

C H A P T E R 4 Tools Screen
127
Traceroute The Traceroute command displays the route that packets travel to the
specified network device. To trace the route from the SA8220 to
another device:
1. From the Command menu, click traceroute.
2. In the Parameters field, type the host name or IP address of the
target device.
3. Click Run.
After a few seconds, the Traceroute information displays in the
Results window, as shown below.
Tools Screen Displaying Traceroute Results
4. To clear the Results window, click Clear.