HP Traffic Director sa7220 - Manual (Page 241)

C H A P T E R 6 e-Commerce Appliance Scenarios
229
Procedure for Scenario 6
Using this procedure, you will configure the SA8220 to use a CRL.
1. Telnet to the SA8220 and log on as the administrator ( admin ).
The Command Line prompt appears, as shown below:
HP SA8220 #
2. To move the prompt to the SSL service in the Richtest policy
group, type this command:
HP SA8220 #config policygroup richtest service
SSL
You will see:
HP SA8220 /config/policygroup/richtest/service/
SSL#
3. To navigate to client-ca, type the following command:
HP SA8220 /config/policygroup/richtest/service
SSL# key client-ca
You will see:
HP SA8220 /config/policygroup/richtest/service
SSL/key/client-ca#
4. To import the ca certificate from the PKI server, type the
following command:
import
You will see:
Paste in the data, end with ... alone on line.