HP Traffic Director sa7220 - Manual (Page 130)

C H A P T E R 4 HP Traffic Director Server Appliances User Guide
118
Ping The Ping command tests the network connection to another
networking device by sending five ICMP packets from the SA8220
to the target device, which if it receives them, sends a reply. When the
SA8220 receives the reply, it displays a message reflecting the
response time from the target device. If the SA8220 receives no reply,
it displays a message indicating that the target device is not
responding.
To "ping" a network device:
1. From the Command menu, click ping.
2. In the Parameters field, type the host name or IP address of the
target device.
3. Click Run.
After a few seconds, the Ping information displays in the Results
window, as shown below.
The Tools Screen Displaying Ping Results
4. To clear the Results window, click Clear.