beautypg.com

2 monitoring power and temperature utilization, 1 about the utilization panel, 2 about utilization graphs – HP OneView User Manual

Page 181: Utilization panel, Utilization, Graphs

background image

Manipulating the view of the data center visualization

To change the data center view, do one or more of the following:

Move the horizontal slider left to zoom in and right to zoom out.

Move the vertical slider up and down to change the vertical viewing angle.

Click and drag the rotation dial to change the horizontal viewing angle.

25.1.2 Monitoring power and temperature utilization

Utilization statistics for power and temperature are displayed on:

The

Utilization panel

Utilization graphs

in the Utilization view

Power utilization metrics

Temperature utilization metrics

25.1.2.1 About the Utilization panel

The Enclosures, Power Delivery Devices, and Server Hardware screens display a Utilization panel
in the Overview for each resource.

The possible states of the Utilization panel are:

Reason

Panel contents

The appliance has collected data and it is being displayed.

Utilization meters display utilization data.

Server hardware without an iLO Advanced license will not
display utilization data.

A licensing message is displayed.

The appliance has not collected data during the previous
24 hours.

no data

is displayed.

The meter might not be set for the following reasons:

The page is loading and the data is not yet available.

There is no utilization data prior to the most recent
5–minute collection period. There may be historic data
in the utilization graphs.

Enclosures will not display temperature data if none of
the server blades are powered on.

not set

is displayed (a gray meter with hash marks).

Utilization data gathering is not supported on the device.

not supported

is displayed.

See the online help for Utilization for more information.

25.1.2.2 About utilization graphs

The appliance gathers and reports CPU, power consumption, and temperature data for certain
resources via utilization graphs.

NOTE:

The minimum data collection interval is five minutes (averaged) and the maximum is one

hour (averaged).

Utilization graphs can display a range of data up to a maximum of three years.

25.1 UI power and temperature monitoring

181