HP OneView - Manual (Page 207)

27.4.9 VM does not restart when VM host time is manually set
Possible cause and recommendation Symptom
You are not using NTP and the VM host’s time was incorrectly set to a time in
the past.
• Reset the time settings on the VM host to the correct time, and then restart the VM appliance.
For more information, see your vSphere documentation.
•
If the appliance or VM host is configured as an NTP client, ensure that the NTP server is
working correctly.
NOTE:
•
For HP-recommended best practices for managing the appliance VM, see “Best practices
for managing a VM appliance” (page 153) .
The appliance VM
does not restart and
the following error
appears in the
vSphere virtual
console: The
superblock last
mount time is in
the future
UNEXPECTED
INCONSISTENCY;
RUN fsck
MANUALLY.
27.4.10 Reinstall the remote console
When running Firefox or Chrome on a Windows client, the first-time installation of the remote
console prevents the installation dialog box from being displayed again. If you need to reinstall
the console software, you must reset the installation dialog box.
Possible cause and recommendation Symptom
If you installed the iLO remote console software using one browser (Firefox or Chrome), but
are using another browser, the dialog box that prompts you to install the software is displayed,
even if the software is already installed.
To reinstall the console, press the Shift key and select Actions
→Launch console.
Reinstall the software
1. Click Install software and close all of the dialog boxes for installing the application.
2. Click My installation is complete — Launch console to launch the console after it is installed.
Installation dialog box
is not displayed
27.4 Troubleshooting the appliance 207