HP OneView - Manual (Page 253)

e. Add one connection to the SAN A network. Enter the information shown in the following
table, and then click Add + to add the connection and reopen the dialog box for the next
step.
Value Attribute
Fibre Channel Device type
SAN A Network
2.5 (the default value) Requested bandwidth
Auto (the default value) FlexNIC
Not bootable Boot
f. Add one connection to the SAN B network. Enter the information shown in the following
table, and then click Add to add the connection and close the dialog box.
Value Attribute
Fibre Channel Device type
SAN B Network
2.5 (the default value) Requested bandwidth
Auto (the default value) FlexNIC
Not bootable Boot
The following illustration shows the Create Server Profile dialog box with all the connections
added.
A.5 Provisioning eight host servers for VMware vSphere Auto Deploy 253