HP OneView - Manual (Page 233)

Enclosure 2
Description Attribute
Enclosure-1904 Name
172.18.1.13 Primary Onboard Administrator IP
address
172.18.1.14 Secondary Onboard Administrator IP
address
User name OAAdmin
Password S&leP@ssw0rd
Onboard Administrator credentials
User name iLOAdmin
Password S&leP@ssw0rd
iLO administrator credentials (all
servers):
Rack 173, U11 through U20 Physical location
I/O bay number Interconnect hardware
1, 2 HP Virtual Connect FlexFabric
10Gb/24-Port Module
Server bay numbers Server hardware models
1, 2 HP ProLiant BL660c Gen8
3, 4, 5, 6, 7, 8, 11, 12, 13, 14, 15, 16 HP ProLiant BL460c Gen8
9, 10 None (bay is empty)
HP Virtual Connect FlexFabric 10Gb/24-Port Module port configurations
Permitted configurations Ports
Either Fibre Channel or 10Gb Ethernet X1, X2, X3, X4
Either 1GB or 10Gb Ethernet X5, X6
Either internal stacking link or 1GB or 10Gb Ethernet. If a port is used for an
internal stacking link, do not use it for an external Ethernet connection. For this
data center, use X7 for the internal stacking link. X7, X8
A.2.2 Data center networks
All data center switch ports that connect to the VC (Virtual Connect) interconnect modules are
configured as described in
“Data center switch port requirements” (page 115) .
A.2.2.1 Fibre Channel networks
Fibre Channel networks for the SAN fabrics
The sample data center has two Fibre Channel SAN switches. To see a graphical representation
of the configuration, see
Figure 17 (page 235) .
The names for the Fabric attach Fibre Channel networks are:
•
SAN A
•
SAN B
A.2 Information about the sample data center 233