22 managing the appliance, 1 managing appliance availability, 1 best practices for managing a vm appliance – HP OneView User Manual
Page 153: 2 how the appliance handles an unexpected shutdown, Managing appliance availability
22 Managing the appliance
22.1 Managing appliance availability
Managing and maintaining appliance availability starts with configuring the appliance virtual
machine for high availability as described in
“Planning for high availability” (page 83)
, and
following the best practices described in
“Best practices for managing a VM appliance” (page 153)
.
In the event of an appliance shutdown, your managed resources continue to operate. For more
information about how the appliance handles an unexpected shutdown, and what you can do to
recover, see:
•
“How the appliance handles an unexpected shutdown” (page 153)
•
“What to do when an appliance restarts” (page 154)
For information about how to shut down or restart the appliance, see:
•
“Shut down the appliance” (page 154)
•
“Restart the appliance” (page 154)
22.1.1 Best practices for managing a VM appliance
HP recommends the following guidelines for managing your VM appliance from the virtual console:
Do not
Do
•
Use thin provisioning.
•
Update the VMware tools. If VMware Tools show Out of Date or
Unmanaged, they are running correctly. These status messages are not a
problem, because the tools are available and running. VMware tools are
updated with each HP OneView software update.
•
Revert to a VM snapshot (unless under specific circumstances, as instructed
by your authorized support representative).
•
Set the Synchronize guest time with host option in the vSphere client when
the HP OneView appliance is configured to use NTP. HP OneView
automatically sets the appropriate Synchronize guest time with host setting
during network configuration. When HP OneView is configured to use NTP
servers, the Synchronize guest time with host option is disabled. If HP
OneView is not configured to use NTP servers, it synchronizes to the host
VM clock and the Synchronize guest time with host option is enabled. In
this case, configure the VM host to use NTP.
•
Reduce the amount of memory assigned to the VM.
•
Use thick provisioning.
•
Use shares and reservations to
ensure adequate CPU performance.
22.1.2 How the appliance handles an unexpected shutdown
The appliance has features to enable it to automatically recover from an unexpected shutdown,
and managed resources continue to operate while the appliance is offline. However, HP recommends
that you use the appliance backup features to ensure that the appliance is backed up daily, and
when you make significant configuration changes, such as adding or deleting a network.
22.1 Managing appliance availability
153