HP 3000 Enterprise Virtual Array - Manual (Page 96)

NOTE:
An active (flashing) display, an error condition message, or a user entry (pressing a push-button)
overrides the default display. When none of these conditions exist, the default display is active after
approximately 15 seconds.
Figure 47 Default LCD display
Displaying the storage system menu tree
The Storage System Menu Tree lets you select information to be displayed (for example, System
Information, Fault Management) or select procedures to implement (Shutdown System, System Password).
To display this tree, press any push-button (
, , , or ) when either of the default displays is active.
• When you select either System Information or Fault Management, you can display, but not
change, product information.
• Selecting Shutdown System lets you implement the procedure for shutting down the system in a
logical, sequential manner. Using the Shutdown System procedure maintains data integrity and
avoids the possibility of losing or corrupting data.
• Selecting System Password lets you create a system password to ensure that only authorized
personnel can modify system operation and functions from Command View EVA.
Use the following procedure to select and navigate the storage system menu tree.
1. The default display alternates between the Storage System Name display and the Node World
Wide Name display.
Push any push-button to return to the Storage System Menu Tree display.
2. System Information is the active display.
Press
to sequence down through the tree.
Press to sequence up through the tree.
Press to select an active display.
Press to return t the default display.
The following table displays all menu options within the OCP display:
96 Storage system hardware components