HP 3000 Enterprise Virtual Array - Manual (Page 102)

Password options
The password entry options are:
• Entering a password during storage system initialization (see Setting Up an HSV110-Series
Controller Pair Using the OCP ).
• Showing the current password. The actual password is not displayed, instead an indicator informs
you of whether a password has been set.
• Changing a password (see Changing a Password ).
• Removing password protection (see Clearing a Password ).
Changing a password
For security reasons, you may need to change a storage system password. First you must select a new,
unique, eight-character password, using the uppercase letters A through Z and the lowercase letters a
through z.
After selecting the new password, use the following procedure to change the password.
NOTE:
Changing a system password on the controller requires changing the password on any Command
View EVA with access to this system.
1. Press to scroll to the System Password menu.
2. Press to select the System Password menu.
3. Press to select Change Password
OR
press
to go to Shutdown Options.
4. Press to select, CHANGE PASSWORD NO
OR
press
to scroll to Clear Password.
5. Press to accept NO
OR
press
to scroll to CHANGE PASSWORD YES.
6. Press to accept YES
OR
press
to scroll to CHANGE PASSWORD NO.
7. To enter the first character, press either or to select an uppercase or lowercase character.
Press to accept a character and select the next password character. The character display
changes to an asterisk.
8. Repeat step 7 for the remaining seven characters.
Press to accept the password and go to CHANGE PASSWORD YES.
9. Press to go to computeroutput>System Password.
10. The system will automatically return to the default display.
102 Storage system hardware components