HP 3000 Enterprise Virtual Array - Manual (Page 130)

Table 41 AC input current and wattage
Nominal Maximum
Input voltage Amps Watts Amps Watts
60-Hz Input
100 VAC–JBOD
4.35 436 6.41 641
208 VAC–North America 2.03 419 2.94 609
50-Hz Input
120 VAC–JBOD
3.59 419 5.27 633
220 VAC–North America 1.92 418 2.78 608
230 VAC–North America 1.92 418 2.78 608
240 VAC–Europe 1.76 416 2.55 607
Table 42 Controller power supply output specifications
Voltage Specification Minimum Nominal Maximum
+3.3 VDC
Output VoltageSteady state current
Power
3.23 VDC 3.30 VDC 3.36 VDC 18 A 1
59.4W
+5.0 VDC
Output Voltage Steady state current
Power
4.90 VDC 5.00 VDC 5.10 VDC 4 A 20.0W
+12.0 VDC
Output Voltage Steady state current
Power
11.4 VDC 12.0 VDC 12.6 VDC 2 A 4.0W
Total Current Total Power 24 A 65.4W
1
1 +3.3 VDC steady state current requires a minimum 5.0-V load of 1 A.
Environmental specifications
There are no controller environmental specifications. See the Rack environmental specifications for this
information in the next section.
Rack
Physical specifications
WARNING!
The weight of the drive enclosure with the elements installed always requires at least two individuals to
move. HP recommends using a fork lift or a hand truck to move an enclosure in the shipping container.
Table 43 through Table 48 define the dimensions and weights of the 9000-Series and 10000-Series
Enterprise Virtual Array racks.
130 Regulatory notices and specifications