Installing command view eva, Installing optional eva software licenses, System shutdown and power up – HP 3000 Enterprise Virtual Array User Manual
Page 40: Storage system shutdown and powerup
2.
With either of the default menus (Storage System Name or Node World Wide Name) displayed,
press any push-button to select the menu tree.
3.
Press
to cycle through the displays until System Password is active (flashing).
4.
Press
to select the system password function.
5.
When the System Password function is flashing, press
to select the change password function.
6.
To change the password, press
or
to show Yes and press
.
The default Enter Password function displays the default password, AAAAAAAA.
7.
Press
or
until the first character of the password is displayed.
8.
Press
to accept this character and select the next character.
9.
Repeat the process to enter the remaining password characters, WMFZJJP.
10.
Press
to enter the password and return to the default menu display.
The controller pair setup is complete.
Installing Command View EVA
Command View EVA is installed on the HP OpenView Storage Management Appliance and runs
in the OpenView environment. Installation may be skipped if the latest version of Command View
EVA is running on the storage management appliance. Verify the latest version at the HP website:
To install a new version, locate the management appliance update CD-ROM and the associated
documentation that was shipped with your storage system. Refer to
. Follow
the instructions in the HP OpenView Storage Management Appliance Update Installation Card to install
the new software.
You will also need a supported browser on the same network as the storage management appliance.
This network can be anything from a LAN to the Internet. The documentation that comes with the update
CD-ROM contains information on supported browser versions.
When the new software is installed, follow the CD-ROM documentation to get to the OpenView Storage
Management Appliance, the launching point for Command View EVA. Follow the instructions in the
OpenView Storage Management Appliance online help to navigate to and launch Command View EVA.
Installing Optional EVA Software Licenses
If you purchased optional EVA software, it will be necessary to install the license. Optional software
available for the Enterprise Virtual Array 3000 includes Business Copy EVA and Continuous Access EVA.
Refer to the documentation included with the software for instructions on installing the license.
System shutdown and power up
The Enterprise storage system is shut down using Command View EVA. Shutdown with Command View
EVA performs the following functions:
•
Flushes cache
•
Removes power from the controllers
•
Disables cache battery power
•
Removes power from the drive enclosures
•
Disconnects the system from Command View EVA
40
Startup and operation