HP 3000 Enterprise Virtual Array - Manual (Page 100)

CAUTION:
If you decide NOT to Power Off while working in the Power Off menu, the Power Off System NO option
must be displayed before you press the ESC ( ) push-button to avoid power-down.
1. Press to scroll to the Shutdown Options menu.
2. Press to select the Shutdown Options menu.
3. Press to scroll to Power Off.
4. Press to select Power Off.
5. Power Off System NO is displayed. Press to accept NO. Press to display Power Off System
YES.
6. Press to accept YES.
7. Press to go to POWER OFF SYSTEM.
Once you have selected the Shutdown System function, you can select and execute a shutdown method
as described in the following sections.
Restarting the system
To restore the controller to an operational state, use the following procedure to restart the system.
1. Press to scroll to the Shutdown Options menu.
2. Press to select the Shutdown Options menu.
3. Press to select Restart.
4. Press to display RESTART SYSTEM NO.
Press to scroll to Power Off.
5. Press to accept NO.
Press to scroll to RESTART SYSTEM YES.
6. Press to accept YES and to go toHSV110 Startup.
7. No user input is required. The system will automatically initiate the startup procedure and proceed
to load the Storage System Name and Node WorldWide Name information from the operational
controller.
Powering off the system
Use the following procedure to remove power from the controller pair, save the data, and remove the
storage system from Command View EVA.
NOTE:
Implementing this procedure removes power from the controller pair and all associated drive shelves. To
restore power to the controller system, you must cycle both PDU breakers in the enclosure.
1. Press to scroll to the Shutdown Options menu.
2. Press to select the Shutdown Options menu.
3. Press to select Restart.
4. Press to scroll to Power Off.
100 Storage system hardware components