HP 3000 Enterprise Virtual Array - Manual (Page 129)

Fibre Channel switch specifications
The Fibre Channel Switch requires a clean, dry environment for normal operation. Table 38 lists the
specifications for the Fibre Channel Switch.
Table 38 Fibre Channel switch specifications
Category Measurement
Weight approximately 7.5 lbs.
Dimensions 8.50 x 1.57 x 16.00 in (W x H x D) the switch with extender is 21.66
in D
Operating Temperature 0 °C to 40 °C for normal operation (ambient air temperature)
Storage Temperature -40 °C to 80 °C noncondensing
Power 50 or 60 Hz 100–250 VAC 0.5–0.3 A
Controller specifications
This section defines the physical, power, and environmental specifications of the Controller enclosure.
Physical specifications
??? defines the dimensions of the controller.
Table 39 Controller enclosure physical specifications
Specification Installed Shipping
Height 62 mm (2.45 in) 267 mm (10.5 in)
Width 502 mm (19.56 in) 762 mm (30 in)
Depth 444 mm (17.49 in) 762 mm (30 in)
Weight 10.4 kg (23 lb) 12.7 kg (28 lb)
NOTE:
Metric dimensions are expressed in whole numbers. For example, 10.795 cm is expressed as 108 mm.
Power specifications
Table 40 and Table 37 define the HSV110 Controller power supply input power requirements and
output power specifications.
Table 40 Controller power supply AC power requirements
AC input voltage Frequency
Minimum Nominal Maximum Minimum Nominal Maximum
180 VAC 202 VAC 220 VAC 47 Hz 50 Hz 53 Hz
208 VAC 57 Hz 60 Hz 63 Hz
208 VAC 240 VAC 254 VAC
Table 41 defines the AC input current and wattage to the controller power supplies.
Enterprise Virtual Array 3000/5000 user guide (VCS 3.110) 129