HP 3000 Enterprise Virtual Array - Manual (Page 114)

1
2
CXO7589A
Figure 57 Raising a leveler foot
1.
Hex nut
2. Leveler foot
3. Carefully move the rack to the installation area and position it to provide the necessary service
areas (see Figure 56 ).
To stabilize the rack when it is in the final installation location:
1. Use a wrench to lower the foot by turning the leveler foot hex nut clockwise until the caster does not
touch the floor
2. Repeat step 1 for the other feet.
3. After lowering the feet, check the rack to ensure it is stable and level.
4. Adjust the feet as necessary to ensure the rack is stable and level.
114 Storage system hardware components