HP 3PAR Operating System Software - Manual (Page 95)

Host Settings
1. In the General group box:
a.
System - Select the system to create the new host.
b. Domain - Select the domain in which to create the new host. Select if not
applicable.
c. Name - Enter the host name. Names are case-sensitive.
d. Set Name - Select the host set in which to create the new host. Select if not
applicable.
e. Host OS - Select the operating system running on the host.
f. Persona - The host persona is visible and disabled. When Host OS is selected, the
corresponding persona is selected for the user, and the Operating System descriptor field
is filled with the Host OS automatically.
•
1 – Generic (Unit Attention Report LUNs, Enable SES device)
•
2 – Generic-ALUA (Unit Attention Report LUNs, Enable SES device, Asymmetric
Logical Unit Access)
•
6 – Generic-legacy
•
7 – HPUX-legacy (Volume Set Addressing, LUN 0: Storage Controller Component)
•
8 – AIX-legacy (Normal Auto Contingent Allegiance)
•
9 – Egenera (Soft Inquiry Data)
•
10 – ONTAP–legacy (Soft Inquiry Data)
•
11 – VMware (Enable Sub-LUN Addressing, Asymmetric Logical Unit Access)
•
12 – OpenVMS (Unit Attention Report LUNs, Report Target Port Groups, Enable SES
device, LUN 0: Storage Controller Component)
•
13 – HPUX (Unit Attention Report LUNs, Volume Set Addressing, Enable SES device,
Asymmetric Logical Unit Access, LUN 0: Storage Controller Component)
•
14 – AIX (Unit Attention Report LUNs, Normal Auto Contingent Allegiance, Enable
SES device, Asymmetric Logical Unit Access)
2. (Optional) In the Descriptors group box, enter the description information as desired in the
Location, IP Address, Operating System, Model, Contact, and Comments fields.
3. Click Next, or click Finish to close the wizard and create the host with the information entered.
Fibre Channel Settings
1. To assign available WWNs:
a.
Select one or more WWNs from the Available WWNs list. This list displays WWNs for
all physically connected host paths not already assigned to hosts.
b. Click the left arrow to add the selected WWN(s) to the Assigned WWNs list.
2. To assign new WWNs, enter the WWN(s) for the host in the New WWN text box and click
Assign.
3. Click Next, or click Finish to close the wizard and create the host with the information entered.
Creating Hosts 95